Eibach Pro Spacer - Wheel Spacers. With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the car's look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.
Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer! Width of spacers: 2x20mm PCD: 6x114,3 Centerbore: 66mm Eibach wheel spacer system 4. Disc with a screw system. With centering collar (centering nose). Track change from 30 to 60 mm (disc width from 20 to 30 mm).Fastening: a disc at wheel carrier: by using special-fixing nut b wheel at disc: by using production (or accessory) nut. Two Pro-Spacer with pressed-in knurled studs (=for one axle). Installation instructions and information on CD. Eibach product code: S90-4-20-019 Notes: S9 - ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh e. 15mm = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw Maximal up to the beginning of the nut. We recommend only to shorten the minimum lengh.
If shorten the stud bolts, first please consider that all wheels used at the car still will fit e. Summer- / winterwheels ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface!
It´s allowed to shorten the stud bolts Fits for. X 220 d (470.210). X 220 d 4-matic (470.211).
X 250 d (470.230). X 250 d 4-matic (470.231). X 350 d 4-matic (470.252).
Made from high-tensile-strength aluminum alloy. Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance.
All applications tested in rigid durability- and fatigue tests. High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021).Significant weight advantage compared to wheel-spacers made from steel. Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick". The Pro-Spacer is available in different versions from 5 to 30? This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Wheel Spacers, Adapters & Spigot Rings". The seller is "tunershop-worldwide" and is located in this country: DE. This item can be shipped worldwide.